CIL vs CIP Gold Recovery: Differences, Pros and the Right Activated Carbon
Carbon-in-leach (CIL) and carbon-in-pulp (CIP) are the two most widely used ways to recover gold from cyanide leach slurry. Both use activated carbon to adsorb dissolved gold, and both feed…
Tuesday, 10 Nov 2026
CIL vs CIP Gold Recovery: Differences, Pros and the Right Activated Carbon
Carbon-in-leach (CIL) and carbon-in-pulp (CIP) are the two most widely used ways to recover gold from cyanide leach slurry. Both use activated carbon to adsorb dissolved gold, and both feed the same elution and regeneration steps. The difference is where and when the carbon meets the pulp, and that choice affects plant size, recovery and how hard the carbon has to work.
This guide explains how each process works, when one is better than the other, and what to look for in the carbon.
In a CIP plant, leaching and adsorption happen in separate stages.
In a CIL plant, leaching and adsorption happen in the same tanks.
| CIP | CIL | |
|---|---|---|
| Leach and adsorption | Separate tank trains | Same tanks |
| Number of tanks | More | Fewer |
| Capital cost | Higher | Lower |
| Gold in solution | Builds up before adsorption | Adsorbed as it dissolves |
| Preg-robbing ores | Less suited | Better suited |
| Carbon residence time | Shorter | Longer |
| Carbon wear | Lower | Higher (longer time in agitated tanks) |
Many plants use a hybrid: a few leach-only tanks followed by CIL tanks.
Whichever process you run, the carbon has to adsorb gold quickly, survive months of agitation and keep its activity through repeated elution and regeneration.
Our FM MAXGOLD is a coconut shell activated carbon made for CIL, CIP and CIC circuits, in 6×12 and 8×16 mesh, with hardness above 98% and iodine number above 1100 mg/g.
We supply FM MAXGOLD and other activated carbons to mining operations across Africa, Asia and the Middle East. Send us your process type (CIL, CIP or CIC), screen sizes and current carbon loss rate, and our team will recommend a grade. Contact us
In CIP, gold is leached first and adsorbed onto carbon in separate tanks. In CIL, leaching and adsorption happen in the same tanks at the same time.
CIL usually costs less to build and suits preg-robbing ores. CIP keeps carbon wear lower and suits fast-leaching ores. The right choice depends on the ore and the plant.
Most plants use 6×12 or 8×16 US mesh coconut shell carbon, chosen to match the inter-stage screens.
It is very hard, which limits breakage and gold loss, and its fine pore structure adsorbs gold-cyanide well. See FM MAXGOLD.
Read more: Gold recovery: the role of activated carbon in the mining industry · Your gold mine is losing gold and your carbon supplier might be why
Recent blog posts
November 3, 2026
Reverse osmosis (RO) membranes are the most expensive part of most water purification and desalination systems, and they are easily damaged. An activated carbon filter in front of the RO is one of the simplest ways to protect them. This guide explains why, where the carbon goes and how to choose and run it. Why […]
November 3, 2026
Most activated carbon is made from one of two raw materials: coconut shell or coal. Both are activated in the same way, with steam at high temperature, but they end up with different pore structures, hardness and purity. Choosing the right one can mean better results, longer carbon life and lower running costs. This guide […]
October 27, 2026
Industrial wastewater is harder to treat than sewage. It often carries chemicals that bacteria cannot break down, strong colour, and dissolved organics that keep COD (chemical oxygen demand) above discharge limits even after biological treatment. Activated carbon is one of the most effective ways to remove what the rest of the plant leaves behind. This […]
FM Support
Hi, Thanks for visiting us.
We shall assist you in fulfilling your requirement.